Light controllers

Light controllers

Light controllers power and dim your LED lights and sync them to the camera trigger. Analog controllers use a knob; digital controllers add per-channel brightness settings, strobe and serial control from the PC or PLC.

Shop by channels: 1-channel light controllers · 2-channel light controllers · 4-channel light controllers · 8-channel light controllers

573 models Configure a systemAll light controllers
Light controllers

313-336 of 573 models

Products

Compare
LS-CTL-0091Brighten strobe controller, 4 ch 448V100-240VACRS232/LAN-$789.00 Ships in 2-3 weeks
LS-CTL-0090Brighten strobe controller, 4 ch 448V100-240VACRS232/LAN-$789.00 Ships in 2-3 weeks
LS-CTL-0086Brighten strobe controller, 4 ch 448V100-240VACRS232/LAN-$789.00 Ships in 2-3 weeks
LS-CTL-0084Brighten strobe controller, 4 ch 448V100-240VACRS232/LAN-$789.00 Ships in 2-3 weeks
LS-CTL-0083Brighten strobe controller, 2 ch 248V100-240VACRS232/LAN-$649.00 Ships in 2-3 weeks
LS-CTL-0079Alternate strobe controller, 2 ch, 2000 W 248VAC 100-240VRS232/LAN2000W$1,469.00 Ships in 2-3 weeks
LS-CTL-0089Brighten strobe controller, 2 ch 248V100-240VACRS232/LAN-$649.00 Ships in 2-3 weeks
LS-CTL-0078Alternate strobe controller, 4 ch, 400 W 448VAC 100-240VRS232/LAN400W$569.00 Ships in 2-3 weeks
LS-CTL-0085Brighten strobe controller, 2 ch 248V100-240VACRS232/LAN-$649.00 Ships in 2-3 weeks
LS-CTL-0076Alternate strobe controller, 4 ch, 250 W 424VAC 100-240VRS232/LAN250W$349.00 Ships in 2-3 weeks
LS-CTL-0088Brighten strobe controller, 2 ch 248V100-240VACRS232/LAN-$649.00 Ships in 2-3 weeks
LS-CTL-0077Alternate strobe controller, 2 ch, 400 W 248VAC 100-240VRS232/LAN400W$509.00 Ships in 2-3 weeks
LS-CTL-0075Alternate strobe controller, 2 ch, 250 W 224VAC 100-240VRS232/LAN250W$299.00 Ships in 2-3 weeks
LS-CTL-0072Digital control box, 8 ch, 200 W 824VDC 24VRS2323.34A$709.00 Ships in 2-3 weeks
LS-CTL-0068Digital control box, 8 ch, 120 W 824VDC 24VRS2323.34A$669.00 Ships in 2-3 weeks
LS-CTL-0071Digital control box, 4 ch, 200 W 424VDC 24VRS2323.34A$539.00 Ships in 2-3 weeks
LS-CTL-0073Digital control box, 8 ch, 200 W 824VDC 24VRS2323.34A$709.00 Ships in 2-3 weeks
LS-CTL-0074Digital control box, 12 ch, 200 W 1224VDC 24VRS2323.34A$889.00 Ships in 2-3 weeks
LS-CTL-0070Digital control box, 4 ch, 200 W 424VDC 24VRS2323.34A$539.00 Ships in 2-3 weeks
LS-CTL-0069Digital control box, 8 ch, 120 W 824VDC 24VRS2323.34A$669.00 Ships in 2-3 weeks
LS-CTL-0067Digital control box, 4 ch, 120 W 424VDC 24VRS2323.34A$489.00 Ships in 2-3 weeks
LS-CTL-0063Digital control box, 4 ch, 60 W, total output current 3.34 A 424VDC 24VRS2323.34A$459.00 Ships in 2-3 weeks
LS-CTL-0066Digital control box, 4 ch, 120 W 424VDC 24VRS2323.34A$489.00 Ships in 2-3 weeks
LS-CTL-0064Digital control box, 4 ch, 60 W, total output current 3.34 A 424VDC 24VRS2323.34A$459.00 Ships in 2-3 weeks

How to choose a machine vision light controller

1. Channels

One channel drives one light at its own brightness. Count the lights that must be set or switched separately: a ring plus a backlight need two channels; a multi-angle setup that takes several images in sequence needs one channel per angle. 2-channel, 4-channel and 8-channel controllers cover most stations.

2. Power per channel

Add up the power of the lights on each channel and keep a margin: a controller rated for less current than the light draws runs it dim or shuts down. High-power line and spot lights may need a high-power controller.

3. Constant, strobe or overdrive

Constant light suits slow or stationary parts. Strobing flashes the light only during the exposure, from the camera or sensor trigger: it freezes moving parts, keeps the LEDs cool and lets the controller drive short pulses above the continuous rating (overdrive) for more light. Check the trigger input, the shortest pulse and the delay between trigger and flash.

4. How it is set

Manual knobs suit fixed setups; RS-232 or Ethernet control lets the vision software change brightness per inspection step and store recipes. Analog dimming takes a 0-10 V signal from a PLC.

5. Voltage and connectors

Match the output voltage to the lights (24 V DC for almost every light here) and check the connector, or plan an adapter cable. Lights and controllers from the same range plug together directly.