Rendered illustration: the actual product may differ in appearance.
Bar lights
Bar light, 288.5 mm lit length (LS-BAR-0126)
Model LS-BAR-0126
LED bar light for directional, low-angle or angled illumination: edges, surface texture, engraving and label reading, mounted singly or in pairs and quads. Lit area 288.5 x 21.9 mm; 24 VDC supply; connection: 5 pin m12 male a-coded.
Specifications
| Model | LS-BAR-0126 |
|---|---|
| Colour | 530nm Green |
| Lens / beam angle | 32 Degree |
| Lit length (mm) | 288.5 |
| Lit width (mm) | 21.9 |
| Length (mm) | 300 |
| Width (mm) | 64 |
| Height (mm) | 30 |
| Voltage | 24 VDC |
| Connector | 5 Pin M12 Male A-Coded |
| Connection at light | Connectorized |
| Driver included | Included |
| Driver location | Internal |
| Intensity control | Analog Voltage |
| Operating modes | Constant On |
| Strobe trigger input | PNP Trigger |
| Operating temperature | up to 60 °C |
| IP rating | IP67 |
| Housing | Aluminum |
| Mounting | Tapped Holes |
| Collimated | Not Collimated |
| Daisy chain | Yes |
| Diffused | Not Diffused |
| Direct connect | No |
| Max overcurrent strobe current | 490 mA |
| Max overcurrent strobe input power | 12 W |
| Maximum constant on current (ma) | 490 |
| Maximum current (overcurrent strobe) (ma) | 490 |
| Maximum duty cycle (%) | 100 |
| Maximum input power constant on (w) | 11.8 |
| Maximum input power overcurrent strobe (w) | 12 |
| Maximum overcurrent strobe duration (ms) | 5 |
| Maximum overcurrent strobe latency (us) | 10 |
| NPN trigger voltage (v) | < 1 VDC |
| PNP trigger voltage (v) | 4-24 VDC |
| Polarized | Not Polarized |
| Wavelength | 530nm Green |
| Compliance | CE |
Complete the station
The configurator matches a camera, lens, light, light controller and cables to each other, and to this part.
Configure a system Selection guide