Lights

Strobe machine vision ring lights

Coordinate the flash with the camera

Find ring lights classified for strobe operation. Compare the published trigger, pulse and controller requirements with the exposure timing and duty cycle of the inspection.

All Ring lights

Strobe machine vision ring lights

1-12 of 12 models

Products

Compare
LS-RNG-0227116 mm Flash light source WhiteØ 116 mm1200 WStrobe-$449.00 Ships in 2-3 weeks
LS-RNG-0228100 mm Flash light source WhiteØ 100 mm1200 WStrobe-$339.00 Ships in 2-3 weeks
LS-RNG-022666 mm Flash light source WhiteØ 66 mm1056 WStrobe-$339.00 Ships in 2-3 weeks
LS-RNG-022090 x 32 mm Flash light source White, Blue90 x 32 mm912 WStrobe-$309.00 Ships in 2-3 weeks
LS-RNG-022562 mm Flash light source WhiteØ 62 mm600 WStrobe-$269.00 Ships in 2-3 weeks
LS-RNG-021970 x 22 mm Flash light source White, Blue70 x 22 mm1200 WStrobe-$229.00 Ships in 2-3 weeks
LS-RNG-0229Flash light source White-768 WStrobeXS10-3T$219.00 Ships in 2-3 weeks
LS-RNG-022238 x 39 mm Flash light source White38 x 39 mm1200 WStrobe-$209.00 Ships in 2-3 weeks
LS-RNG-022126 x 27 mm Flash light source White26 x 27 mm312 WStrobe-$179.00 Ships in 2-3 weeks
LS-RNG-022432 x 25 mm Flash light source Blue32 x 25 mm456 WStrobe-$149.00 Ships in 2-3 weeks
LS-RNG-022324 x 24 mm Flash light source Red24 x 24 mm312 WStrobe-$149.00 Ships in 2-3 weeks
LS-RNG-021835 x 22 mm Flash light source White35 x 22 mm768 WStrobe-$159.00 Ships in 2-3 weeks

Coordinate the flash with the camera

Strobe lighting selection combines optical geometry with electrical and timing requirements. The ring must illuminate the required field while the controller operates within the selected light specifications. Check the complete timing chain from trigger source to camera exposure and light pulse before choosing a system.

  • Confirm the rated supply, drive method, pulse duration and duty cycle for the exact model. Do not infer an overdrive current from another light in the range.
  • Match the camera exposure and trigger arrangement with the controller input, output and channel requirements, including connector and wiring details.
  • Check the ring opening, working distance and colour on the moving part, then verify the required image detail and repeatability at the intended production rate.

Configure a system · Browse all Ring lights