Light controllers
Digital controller, MDPS series, 4 ch, 96 W (LS-MDPS2496B-4TDP)
Model LS-MDPS2496B-4TDP
Small, light digital controller with switchable strobe and constant-light modes, optocoupler-isolated external trigger, power-failure memory and overload/short-circuit protection; needs an external power supply.
Features
- Small, light and flexible installation
- Strobe mode and constant light mode can be switched as required
- External trigger uses high-speed optocoupler isolation
- Power failure saving function
- Overload and short-circuit protection
- Small size, light weight
- Constant-on and ON/OFF lighting in one unit
- Communication: RS232
- Mounting: DIN rail
- External trigger input with high-speed optocoupler design, fast and reliable
Specifications
| Model | LS-MDPS2496B-4TDP |
|---|---|
| Operating temp/humidity | 0~40 °C, 20~85 %RH (non-condensing) |
| Storage temp/humidity | 20~60 °C, 20~85 %RH (non-condensing) |
| Drive method | Constant voltage |
| Light control mode | 0-255 level PWM control; panel buttons / RS232 |
| PWM frequency | 86KHz |
| Input voltage | DC 24V |
| Channels | 4 |
| Output voltage | DC 24V |
| Max output current | 4A (single channel max current 3A) |
| Total power | 96W |
| Output port | SMP-03V-BC (1: output+ 2: NC 3: output-) |
| External trigger voltage | DC5V~24V (current about 5.6mA) |
| Trigger delay | <40μs |
| Cooling method | Natural cooling |
| Weight | 170g or less |
| Dimensions | 50 x 68.9 x 98.9 mm |
| Display | 4-digit LED: first digit = channel being set, last three digits = its value |
| Buttons | CH = channel switch (H0 = constant-off, H1 = constant-on); + increase; - decrease |
| Indicators | P lit at normal power-on; B flashes on over-current or short-circuit protection |
| Brightness / pulse setting | Digital mode: 0-255 brightness levels; strobe mode: 0-999 ms pulse width |
| Trigger port | DC24V (power input +), GND (power input -), COM (common, non-polar), CH1-CH4 (external trigger inputs), COM; the two COMs are linked internally |
| Mounting | C45 DIN rail 35 (rail clasp 15.1 x 55) |
| Drawing dimensions (mm) | 50 W x 95.9 H x 68.9 D (65.3 body) |
| Total output (W) | 96 |
Complete the station
The configurator matches a camera, lens, light, light controller and cables to each other, and to this part.
Configure a system Selection guideOther sizes in the Digital controller, MDPS series series
| Model | Size | Power | Price | Availability | |
|---|---|---|---|---|---|
| LS-MDPS2475B-4TDP | 4 ch, 75 W | 75 W | $289.00 | 4 in stock | View |