Lenses & opticsGuide

Working distance to field of view ratio: aim for 2× to 4×

The working distance to field of view ratio rule: keep WD 2–4× the field width and focal length 2–4× the sensor diagonal, with a worked lens example.

LumaSpec Vision9 min read Share on LinkedIn

On this page 8 sections
  1. 01The rule: stand two to four field widths away
  2. 02Why too close costs image quality
  3. 03Worked example: 100 mm field of view on a 2/3" sensor
  4. 04The same rule as focal lengths: 2–4× the sensor diagonal
  5. 05When the rule does not apply
    1. Telecentric lenses
    2. Cells that force a short standoff
    3. Ports, windows and water
  6. 06Checks before you order
  7. 07From the ratio to a part number
  8. 08Questions

Every lens has a comfort zone of geometry: a band of working distances and field sizes where its design keeps aberrations low. Step outside it — most often by squeezing a wide field of view into a short standoff — and you pay with soft corners, barrel distortion and a front element that grows faster than your budget. This guide gives the two-ratio rule that keeps a system inside that band, works it through with real arithmetic on a 2/3" sensor, and marks the cases where the rule bends: telecentrics, tight cells and ports in the path. You will leave with a standoff, a focal length and a short list of checks before ordering from the machine vision lenses range.

The rule: stand two to four field widths away

Commit to the geometry before the glass: the working distance should be two to four times the width of the field of view. A 100 mm field belongs at 200–400 mm of standoff; a 25 mm field at 50–100 mm. In lens terms the same constraint reads: focal length two to four times the sensor diagonal. A 2/3" sensor carries an 11.0 mm diagonal, so its band is 22–44 mm of focal length.

WD / FoV width = 2 to 4 f / sensor diagonal = 2 to 4 m = sensor width / FoV width f = WD × m / (1 + m)

The two ratios describe one design point from opposite ends. How sensor size and focal length set the field of view fixes the magnification; the ratio rule then chooses where along the standoff axis that magnification is reached. Inside the band, a standard fixed-focal-length design works at small field angles, exactly where its distortion and MTF figures were optimized. The band is a starting rule rather than a wall, but starting inside it is what lets catalog lenses deliver their stated performance.

How sensor width, working distance and field of view set the focal length Rays from the edges of the sensor pass through the lens and spread to the edges of the field of view. The ratio of sensor width to field of view is the magnification m.CameraField of view (FOV)Working distance (WD)≈ fsensor width slensm = s / FOVf = WD × m / (1 + m)
How sensor width, working distance and field of view set the focal length. Rays from the edges of the sensor pass through the lens and spread to the edges of the field of view. The ratio of sensor width to field of view is the magnification m.

Why too close costs image quality

The ratio sets the angle at which light from the field edge reaches the lens, and that angle drives almost everything that goes wrong at the frame edge. The classic off-axis faults — distortion, field curvature, coma, lateral colour — grow with field angle faster than linearly. Off-axis brightness falls with the fourth power of the cosine of the field angle:

WD / FoV width Field half-angle Edge brightness vs centre
1 26.6° 64%
2 14.0° 89%
4 7.1° 97%

At a ratio of 1 the field edge sits 26.6° off axis and arrives about a third darker than the centre. Hold the same field at ratio 4 and the edge is 7.1° out at 97% brightness, comfortable for any design. Squeeze to half a field width and the edge reaches 45° and a quarter of the brightness — no exposure setting recovers contrast the geometry discarded.

Correction is the second cost. Holding good performance to 26° field angles takes more elements, larger glass and tighter tolerances than staying under 15°, which is why short-standoff wide-field lenses jump in size and cost. MTF and distortion are published at the magnification a lens was designed around; run it far from that point and both slip — why lens MTF falls off design magnification covers the mechanism and the fixes.

Worked example: 100 mm field of view on a 2/3" sensor

Inputs: the part is 90 mm wide and needs about 10% margin, so the target field is 100 mm × 75 mm. The camera carries a 2/3" sensor — 8.8 × 6.6 mm, 11.0 mm diagonal. The cell offers roughly 300 mm between part and camera.

The rule first: standoff between 2 × 100 mm = 200 mm and 4 × 100 mm = 400 mm, so the 300 mm available sits mid-band. Magnification from the sensor:

m = 8.8 mm / 100 mm = 0.088×

Focal length at the offered standoff:

f = 300 mm × 0.088 / (1 + 0.088) = 26.4 mm / 1.088 = 24.3 mm

The nearest catalog focal length is 25 mm. Check it against the second ratio: 25 mm / 11.0 mm = 2.3, mid-band again. Back-solve the standoff the 25 mm lens actually needs:

WD = 25 mm × 1.088 / 0.088 = 309 mm

That is a working distance to field of view ratio of 309 / 100 = 3.1, inside the band with room for brackets. Vertical fit: 6.6 mm / 0.088 = 75 mm, matching the target exactly. Decision: a 25 mm lens on the 2/3" camera, lens face 310 mm from the part, 10% margin all round.

The 35 mm route buys reach and costs clearance: WD = 35 mm × 1.088 / 0.088 = 433 mm, a 4.3 ratio just past the top of the band and 125 mm deeper into the cell. The LS-FFL-0679 is a 35 mm, 2/3", 6 MP C-mount machine vision lens of exactly this class. Take the 35 mm when the extra reach is wanted; take the 25 mm when the cell is tight.

Run your own case through the lens focal length calculator, which hands its result to the finder; the full selection method is in machine vision lens selection: focal length calculation.

Lens focal length, field of view and working distance
Units
Solve for
Focal length
– mm
Field of view
– mm
Working distance
– mm
Magnification
– x
Angle of view
– °
Pixel on the part
– mm

Thin-lens model: m = sensor width / field of view, f = WD × m / (1 + m). Accurate to a few percent above about 150 mm; check the lens's minimum object distance.

Find lenses with this focal length Open the full calculator

The same rule as focal lengths: 2–4× the sensor diagonal

When the sensor is fixed, the band converts directly into focal lengths:

Sensor format Diagonal Focal lengths in the band
1/2" 8.0 mm 16–32 mm
2/3" 11.0 mm 22–44 mm
1" 16.0 mm 32–64 mm
4/3" 22.6 mm 45–90 mm

Below the band is wide-angle country: steep ray angles, rising distortion, calibration in your future. Above the band the optics stay comfortable and the cost turns physical — a longer body, a larger front element, tighter focus tolerance, a bigger cutout in the machine.

Four lenses from the catalog show the spread:

Specification LS-FFL-1582 LS-FFL-0602 LS-FFL-0679 LS-FFL-1676
Mount C-mount C-mount C-mount M58
Sensor format 2/3" – – Ø60
Aperture 1:2.8~16 F2.4 Manual iris F2.8 Manual iris –
Focal length 8 mm 8.5 mm 35 mm 60 mm
Distortion <0.1% <0.7% – –
Resolution 10 MP 10 Megapixel 6.0 Megapixel (2.4 μm pixel size) 65 MP
Format – 1" 2/3" –
M.O.D. – 0.1 m 0.2 m –
Size – dia. 80 x 67.1 mm dia. 33 x 30.6 mm –
Weight – 270 g 50 g –
Price $309.00 $429.00 $219.00 $785.00

Values as printed in each product's data sheet; open a part for its drawing and full specifications.

The two short entries sit at 0.7 and 0.5 ratios on their own formats — wide-angle tools for standoffs fixed short by the machine. The 35 mm on a 2/3" sensor is a 3.2 ratio: the default case. The 60 mm large-format entry serves wide fields on big sensors at long reach across a 214–1536 mm working distance range. None is wrong; each answers a different ratio.

When the rule does not apply

Telecentric lenses

The band governs entocentric lenses, the kind whose image shrinks as the part moves away — the distinction entocentric vs telecentric lenses: when to use each draws. A telecentric lens fixes magnification inside the objective and holds it across its stated working range; the field of view comes from the front optic diameter, as telecentric lens size: front optic diameter sets the field of view explains. Standoffs tens of field-widths long are the design, not an error, so choose by magnification and image circle instead — telecentric lens selection: match magnification and image circle.

The LS-TCL-1972 is a 1x, 2/3" C-mount telecentric lens with a 440 mm working distance.

Telecentric lenses1x, WD 440 mm, 2/3", C-mount telecentric lens, length 177.5 mm (LS-TCL-1972)LS-TCL-1972
Sensor format
2/3"
Mount
C-mount
Image circle
8-11 mm
Type
Object-side telecentric
$1,239.00View partBuild a system with it

At 1x a 2/3" sensor frames an 8.8 × 6.6 mm field, so this objective stands fifty field-widths from the part, and the geometry is fine because magnification never depended on the standoff.

Cells that force a short standoff

When the machine gives you one field width of height, stop fighting for the band and buy the geometry instead: a short-focal wide lens, an M12 board lens of the kind M12 lens selection for board cameras covers, or a prism from lens accessories to fold the path sideways when there is no height at all. Then calibrate: a distortion profile built from a calibration board, as in building a lens distortion profile without an LCP file, buys back most of the measurement accuracy the wide angle costs. Budget light for the edge falloff rather than trying to exposure it away.

Ports, windows and water

Measure the field through the port, not in air. A flat window or water path refracts rays and narrows the cone the lens accepts, so the field behind the glass is smaller than the focal length promised, and the standoff arithmetic must use the refracted geometry. Choosing a lens for an underwater field of view works that case through.

Checks before you order

  • Sensor diagonal and pixel pitch written down; the lens image circle must cover the diagonal.
  • Field of view carries 10–15% margin per axis for part wander.
  • Magnification, then focal length at the real standoff; the focal length over diagonal ratio lands between 2 and 4.
  • Ratio below 2: note the lens's distortion figure and plan calibration before promising a measurement tolerance.
  • Ratio above 4: check body length, mass and focus tolerance at the standoff, and depth of field against part height — the trade in lens aperture, working distance and depth of field.
  • Resolution grade matched to the sensor's pixels, as lens resolution vs pixel size sets out.
  • Light geometry fits too: a dome or ring light needs clearance around the part, not just the camera.

From the ratio to a part number

Filter the lens finder on sensor format, mount and the focal-length band from the table, then confirm working distance and image circle on the shortlist. The lens configurator walks the same chain — camera, field, standoff — and ends at parts that fit together. More geometry groundwork is on the lenses topic page.

Build the whole station

The configurator matches a camera, lens, light, light controller and cables to each other, step by step, and lists only parts that fit what you already picked.

Start with the lens

When the layout fights the band — a 100 mm field that truly cannot have 200 mm of standoff, or a 1" sensor that must work from 2 m — bring the numbers from the worked example above to the contact page; a constraint set with numbers turns into a part list fast.

Questions

Why is the working distance to field of view ratio 2 to 4?

The band holds the field half-angle between 7° and 14°, where chief rays arrive at moderate angles and standard lens designs keep distortion, field curvature and coma low, with edge brightness near 90% or better. Below a ratio of 2 the edge angle passes 14° and those errors climb fast. Above 4 the image stays good and you mainly pay in lens size and cost.

My cell only allows one field width of standoff. What do I do?

Use a short-focal-length wide-angle lens and plan calibration from day one. At a ratio of 1, expect barrel distortion and corners about a third darker than centre, so pick a lens with a stated low distortion figure for the format, calibrate with a board, and light the part so edge features keep contrast. An M12 board camera lens is often the practical fit at these standoffs.

Does the ratio rule apply to telecentric lenses?

No. A telecentric lens holds magnification across its stated working range, so standoff comes from the model's specification, not from the field size. The field of view is set by the front optic diameter, and working distances tens of field-widths long are normal. Select by magnification instead: magnification equals sensor width divided by field width, then match the image circle to the sensor.

Is a working distance above four field widths a problem?

Not for image quality. Longer standoffs at the same field keep ray angles small; the ratio grows only because the focal length grows. The costs are physical: a longer and heavier body, a larger front element, tighter focus tolerance and a bigger footprint in the cell. Check body length and depth of field at that standoff before committing the layout.

How much margin should the field of view have around the part?

Ten to fifteen percent per axis. A 90 mm part wants about 100 mm of horizontal field: wander room for placement, plus allowance for the black borders undistortion leaves at the frame edge. If the margin drops a feature below three pixels, add camera pixels rather than shrinking the margin — small features on a tight field are what lose inspections.