Special lights
Laser fiber light (2SLG350) (LS-2SLG350)
Model LS-2SLG350
Laser Fiber Light (light box) the maximum white brightness is approximately 30 million Lx, and the frequency can reach 8KHZ.
Features
- The LCD display screen shows the status and set actions
- It can be manually adjusted or externally controlled through software
- Constant current dimming, with adjustable dimming levels of 256/1024
- Support RS232 communication and Ethernet communication
- It is equipped with overcurrent protection, over-temperature protection and power-off preservation functions
- The maximum white brightness is approximately 30 million Lx, and the frequency can reach 8KHZ
Specifications
| Model | LS-2SLG350 |
|---|---|
| Model as printed | LS-2SLG350-W |
| Output power | 350W |
| Dimension | L193.5xW155xH203(mm) |
| External trigger voltage | Strobe / constant on using External trigger voltage 5-24V |
| Color temp. | 7000K |
| CRI | 70 |
| Emitting angle | 50° |
| luminance value | Approximately 30 million Lx(8mm optical fiber beam) |
| Compatible fiber diameter(mm) | The core diameter of the high-temperature resistant optical fiber is 6-14mm |
| Color | White |
| Average life span | 15,000 hours (stabilization time of 70% of the maximum light quantity) |
| Drive mode | Constant Current Driving |
| Input voltage | 100-240V AC |
| Number of channels | 1 way |
| Baud rate | 19200bps |
| Input frequency range | 50/60Hz |
| Luminance control method | Manual encoder knob adjustment, remote adjustment on PC |
| Luminance control level | 256/1024 level |
| Protection functions | The set brightness parameters will be automatically saved upon power failure |
| External trigger frequency | It is determined by the external trigger signal mode. If the duty cycle of the external trigger signal is 50%. The maximum external effective trigger frequency is 8KHZ |
| External trigger respond time | 20us |
| Startup response time | ≦6S |
| Communication mode | RS232/LAN |
| Service environment | Temperature : 0 to 40ºC,humidity : 20 to 85%RH(Non-condensing) |
| Storage environment | Temperature : 0 to50ºC,humidity : 20 to 85%RH(Non-condensing) |
| Constant on/constant off mode switching | This model has two modes: constantly on and constantly off, which can be switched through the initial state function inside the MANU |
| Shipping weight | 0.20 kg |
Applications
- Electron endoscope
- Automotive endoscope
- Industrial endoscope
- Optical fiber
Complete the station
The configurator matches a camera, lens, light, light controller and cables to each other, and to this part.
Configure a system Selection guide