A Python acquisition script that ran for months fails the morning after the SDK upgrade, with an AttributeError on a method nobody edited. The SDK moved from major version 2 to major version 3; the script did not. The traceback is your migration list, and the fix is to port the code, not to hold the old environment forever. This walkthrough is for engineers who maintain camera scripts on vision controllers and PCs. You will pin each environment's SDK version, confirm every rename by introspection, port the calls in a fixed order, gate version-dependent code with a runtime version check, and sign off on the hardware the line actually uses.
The symptom, and what the traceback already tells you
The failure has a signature worth reading closely. The same script runs in the old virtual environment and dies in the new one, at a line you never touched:
AttributeError: 'Camera' object has no attribute 'setBoardSocket'.
Did you mean: 'getBoardSocket'?
Those are the real method names from a widely hit v2-to-v3 camera SDK port; your names will differ, the shape will not. Python 3.10 and later build that suggestion by scanning the object for close matches, so "Did you mean" is a free migration hint: it names the sibling call that survived.
Three patterns cover almost every major-version break. A setter disappears while its getter survives, as above: the setting moved, usually into the node's constructor arguments or a settings object built before the node is created. No suggestion appears: the method was removed outright, and the release notes name the replacement. The failure is an ImportError or ModuleNotFoundError instead: a class or a whole submodule moved, or an optional extra was split into its own package.
Likely causes, most probable first
Work down this list; the first cause explains most cases.
- The script predates the new API. The traceback points into your own file, the object exists, and the attribute does not. Test: introspect the failing class as in the second test below.
- An SDK-shipped example or utility has not been ported yet. The failing file lives in the package's examples or utilities folder, and the project tracker already lists it. The fix ships in an SDK release, not in your code: update the package to the release whose notes mark it ported. The same mechanism drives SDK examples that raise AttributeError after a version mismatch.
- Two environments hold two different versions. The classic report is "works on the bench, fails on the line". Test: print the installed version in each environment (first test below).
- An optional extra moved to its own package. The import fails before any camera call, and ModuleNotFoundError names a module your code never imports directly. Test: read the new major's install notes for split-out extras.
- The break followed a firmware update, not the SDK upgrade. The SDK version matches everywhere and the call existed before. That is a different repair: follow the firmware-update API fix, and if the device stopped enumerating at all, start with the new camera module not detected check.
Test one: pin the version in each environment
Run the same three lines in every environment before editing any code:
# Replace "your-vision-sdk" with your SDK's distribution name.
from importlib.metadata import version # standard library since Python 3.8
print(version("your-vision-sdk"))
The old environment prints something like 2.5.6 and the new one 3.0.0 (example values). The decision follows immediately: when the versions differ, you are not debugging hardware, you are porting an API, so stop swapping cables and start mapping calls. The lookup raises at startup when the distribution is missing, which is the behavior you want on a line. Keep these lines permanently at the top of every deployed script, logged next to the camera's firmware version.
Test two: confirm each rename before you rewrite
Introspect the class before changing anything:
import your_vision_sdk # illustrative module name
node = your_vision_sdk.Camera() # illustrative class
print(sorted(m for m in dir(node) if "board" in m.lower()))
# example result: ['getBoardSocket']
The result sorts your call sites into three piles. The same stem survives with its direction flipped, a get where a set was: the setting moved to construction time, so rewrite it as a constructor argument or a settings object. Nothing survives: the helper was removed, so take the replacement from the migration notes instead of writing to the object's internals. The name survives with different arguments: the signature changed, and you must port the arguments too — the WaitForFrame signature fix is exactly this class of failure. The package's type-stub files list the current methods of every class; read them like a data sheet before writing code.
The fix: port the calls in a fixed order
- Inventory. Search the codebase for every call into the SDK and count the sites. A first pass over a mid-sized acquisition script might sort 22 sites into 13 renamed methods, 6 moved settings and 3 removed helpers (13 + 6 + 3 = 22; illustrative counts). The removed helpers need replacements, not renames, and they set the real schedule.
- Map before writing. For every dead name, write the replacement from the new major's migration notes: renamed, moved to a constructor argument or settings object, or removed. When the new major moves acquisition onto a GenICam-based model, the port is bigger than renames, so follow the legacy SDK to GenICam migration instead of patching call names.
- Port the SDK's own updated examples first. The vendor already did the migration, so the updated example is the reference diff for your mapping.
- Fix in traceback order, not file order. Run, fix the first failure, run again. A removed helper hides every rename behind it, so file order wastes passes.
- Keep configuration and cleanup semantics. Configuration calls belong on the right object in the right order — the pattern behind camera SDK instance-method configuration errors. Refactor the cleanup paths along with the calls, or every failed test run leaks a camera handle, the failure in camera handle cleanup after Python script errors.
Gate version-dependent code with a runtime version check
A mixed fleet never upgrades on one day: the line controller gets the new major in March, the bench next quarter. Gate the version-dependent lines so one codebase runs on both:
# Illustrative: swap in your SDK's distribution name and call paths.
from importlib.metadata import version
SDK_NAME = "your-vision-sdk" # str: your SDK's distribution name
def sdk_major() -> int:
"""Installed major version of the SDK: 2, 3, ..."""
return int(version(SDK_NAME).split(".")[0])
new_settings = {"exposure_us": 5000} # dict: settings for the v3 path
old_settings = {"exposure_us": 5000} # dict: settings for the v2 path
def configure_camera(cam) -> None:
if sdk_major() >= 3:
cam.configure(new_settings) # v3 call path, illustrative names
else:
cam.set_config(old_settings) # v2 call path, illustrative names
Compare versions as integers, never as strings. String comparison ranks "10.0" before "9.0" because the character '1' sorts before '9', so release 10 looks older than release 9; integer tuples get it right, (10, 0) > (9, 0). The same trap bites point releases: "2.14" sorts before "2.9" as strings, while (2, 14) > (2, 9) as integers. Splitting the major off as an int, as above, sidesteps the whole comparison.
The test that proves the gate: run the same script in both environments and print which branch ran. The v2 environment must print the legacy path and the v3 environment the new path; if both print the same one, the gate is reading the wrong distribution name.
Verify the port on the hardware that runs it
An SDK major can carry new defaults, so trust readback, not intention: after configuration, read the pixel format, exposure and trigger settings back from the camera and compare them against your recorded baseline. Then measure. Capture 1,000 frames, timestamp the first and the last, and compute frame rate as 1,000 divided by elapsed seconds. If the port captures 1,000 frames in 16.7 s, the rate is 1,000 / 16.7 s = 59.9 fps — 0.1 fps under the 60 fps the old build held. Three consecutive runs short by more than 1% (more than 0.6 fps at a 60 fps target) means a default changed somewhere; go read the readback, not the scheduler.
Start every timing run from a known camera state, the discipline in the leftover-settings fix, and on smart cameras match SDK and firmware versions before judging any number, as in the smart camera deployment check.
Run both environments on the controller class that runs production. For a one-camera line, the MV-VC3301H-128G66 with 8 GB of memory and 4 built-in light channels runs the bench. Consolidate multi-camera tests onto the MV-VC5525-256G70-NN, which pairs 32 GB of memory with 5+ LAN ports and PoE camera ports.
- LAN ports
- 5+ LAN ports
- USB 3 ports
- 3-4 USB 3 ports
- Light outputs
- 4 built-in channels
- Memory
- 8 GB
- LAN ports
- 5+ LAN ports
- USB 3 ports
- 3-4 USB 3 ports
- PoE
- PoE camera ports
- Light outputs
- 8 built-in channels
The same workflow ports any script that drives area scan cameras or vision controllers in your fleet; filter the vision controllers by LAN port count and memory when the bench needs to match the line.
When pinning the old version is the right answer
A validated line in a freeze window should pin the exact installed version; reproducibility is the point of validation. Pinning is a schedule, though, not an end state. An old major stops receiving fixes, and newer camera models typically need newer SDK releases, so the pin gets a written end date and the port runs inside it. When the environment itself must stay still — a container image, an edge box — pinning one library version everywhere is the documented repair, as in the Docker SDK version mismatch fix and the same fix for edge inference devices.
The decision: pin in production for the length of a scheduled port window measured in weeks; port and gate as the end state; keep the old virtual environment only until sign-off, then delete it.
Prevention: make the next major migration small
Hide the SDK behind a thin adapter layer: every call into the SDK passes through ten to twenty of your own functions, so the next major touches one file instead of 22 call sites. Log the SDK version and the firmware version at startup of every run, and the "works there, fails here" question answers itself from the logs. Keep the same approval-to-readback discipline for SDK updates that you keep for camera firmware updates, and run the test script in continuous integration against both majors on every commit.
The same failure exists one level up in host software: control-system modules written against one SDK major break when the host platform upgrades. The module compatibility guide for SDK major upgrades walks the matching checks for that layer. More fixes in this class are collected on the systems topic page.
Checklist before you switch majors
Run this list on the bench before the line sees the new major.
Before the upgrade
- Record the baseline: SDK version, firmware version, frame-rate target, one reference image. Sign-off needs a pass/fail reference.
- Clone the working environment with a fresh virtual environment and the pinned old SDK installed. Rollback should cost one command, not one afternoon.
During the port
- Read the new major's migration notes and build the rename, move and removal map before editing anything. Mapping first prevents thrash.
- Port the SDK's own updated examples first, then your script in traceback order. The vendor's diff is the reference answer.
- Gate every version-dependent line behind the runtime major check. One codebase must serve a fleet that upgrades unevenly.
Before sign-off
- Read the settings back and time 1,000 frames on the target controller. Majors carry new defaults; the line is the judge.
- Set an end date for the old environment and delete it when the port passes. Stale environments fail quietly months later.
When the port lands on new hardware, start at the system configurator, and if a traceback resists the mapping, write to the applications team with the traceback and both version numbers.
Questions
Can I keep the old and new SDK installed in the same Python environment?
Not cleanly at the Python level: one environment holds one installed version of a distribution, so installing the new major replaces the old one. Run two virtual environments from the same interpreter instead, pin the old major in one and the new major in the other, and keep both until sign-off. One more limit: two processes cannot usually hold the same camera open at once, so stop one environment's script before starting the other's.
How do I find every call that needs porting without running the script?
Search the codebase for the SDK's import name, then list every attribute access on the objects it creates. Compare that list against the migration notes' renamed, moved and removed entries, and against the new class listing printed by dir() or the package's type stubs. Doing it statically, before any hardware is connected, turns the port into an editing job with a known length.
Does a minor version update ever break call names?
By the versioning convention most SDK vendors follow, renames and removals wait for a major release, and minor releases only add. Treat that as a convention, not a contract: read the changelog for every update and re-run the timing and readback tests after each one, so a surprise break surfaces on the bench during a scheduled window instead of on a running line.
Why does the same script work on one PC and fail on another?
Most often the two machines hold different installed versions: a bench that still has the old major and a controller where the new one was installed. Log the SDK version at startup on both. If the versions match and the failure persists, the difference is firmware or device configuration, not the API — check the firmware next.
Should I pin the exact SDK version in production?
Yes, in production, with a written end date. An exact pin makes a validated line reproducible. It is the wrong end state for development, because the old major stops receiving fixes and newer camera models typically need newer SDK releases. Pin in production, port in development, and gate the code so the same script serves both.

